Open ports

[hejd12345]

I need some help open my ports.
When I use CMD and use the commands "ipconfig" I get this

and that is the only information I get.
1. So should I take the IP adress behind the green box and put it in my config.lua?
2. Should I take the IP adress behind the green box and use it when I portforward ports 7171, 7172, 80, 3306? (did I miss any ports)?

 

[dominique120]

he wanted it port forwarded so i was telling him how to do it with that lol im not gunna judge just trying to help people

I am helping you by telling you that opening port 3306 is unsafe and lets hackers in I'm not judging you for helping, just improving and enhancing your answer.

 

[kikos]

Make sure your local ip is the correct one.
When I restart the pc it changes so I need to configure it again, check that

 

[hejd12345]

Make sure your local ip is the correct one.
When I restart the pc it changes so I need to configure it again, check that

Already done.

 

[hejd12345]

I just reset my router and changed the routers settings but it did not work either.

 

[Forsaken13126]

Yeah Im just helping with what he wanted xD I try to do that when I can

 

[Tjay]

I just reset my router and changed the routers settings but it did not work either.

Ive fixed this for many friends lol. Its not that hard. Send me a pm if you still need help. Ask around people know me lol. Above for instance lol.

 

[Tjay]

Better to get an host... i been hosting an war map and my computer is to hot.. i cant even shut it off... you should buy host recommanded!

Get more fans then haha.

 

[hejd12345]

I just allowed all inbound connections in my firewall but it did not work either.

 

[Aleada]

Is your "IPv4 Address" the same as your "local IP"?

For example: you have your local IP set to: 192.168.1.136
Is that what your "IPv4 Address" is? (In your CMD after you type /ipconfig)

 

[hejd12345]

Is your "IPv4 Address" the same as your "local IP"?

For example: you have your local IP set to: 192.168.1.136
Is that what your "IPv4 Address" is? (In your CMD after you type /ipconfig)

Yes it is.

 

[hejd12345]

I discovered something strange. I downloaded and installed a program called PFPortChecker to check if my ports are open.
Before I checked the port on canyouseeme.org it was closed.
But when I used the newly installed program it said it was open.
Now when I check canyouseeme.org it said the port is open.

So basically the port opened when I ran PFPortChecker and checked if it was open.
Can anyone describe why? xD

Edit: My friend can join all OT servers except my...

 

[Megy Air]

Lol i thought this problem is same as mine my port was blocked by my isp i calles to them for second i was able to open port it opened after they turned firewall from there off

 

[hejd12345]

Now I restarted my computer and canyouseeme.org says my ports are closed.
Now I did the same as before, checked if my port are open on PFPortChecker and it said my port are open. Then checking canyouseeme.org and now it says my port are open...

 

[hejd12345]

Okay. I got it working, my ports are open
The problem now is that my friend can not join but he can join all other OT servers.

 

[kikos]

Okay. I got it working, my ports are open
The problem now is that my friend can not join but he can join all other OT servers.

right global ip on config.lua?

 

[hejd12345]

right global ip on config.lua?

Yes.

 

[Megy Air]

I still don't believe you send screenshoot of your ports from http://www.yougetsignal.com/tools/open-ports/