Tutorial on pyramids by Storm aka Casa
I have been asked on many occasions how this is done so here you go!
The 1st perfet pyramid isnt easy! but i will teach you how to make it then you will master the effects yourself!
ORDER NUMBER()
(1) Build your foundations (the floor). ID no : 412 i use. *see picture 1*
(2) Put the inner walls and an entrance ontop of your foundation. ID no : 1060/Door ID no : 1239 *see picture 2*
(3) Place inner Pyramid walls 1 square away from the sides, 2 squares away from the corners on your foundation. ID no : 1398/1400/1402/1404 *see picture 3*
(4) Place the outer Pyramid walls at the edge of your foundation BUT leaving the corners. ID no : 1399/1401/1403/1405 *see picture 4*
(5) Place your inner corners and outer corners on your foundation. inner corner ID no : 1553/1555/1557/1559. outer corner ID no : 1552/1554/1556/1558 *see picture 5*
(6) Now place a raised floor inbetween the innerwall and inner pyramid wall. ID no : 1071. *see picture 6*
(7) Place fake edges on the raised floor so it gives the pyramid a detailed look!. ID no : 1072/1073/1074/1075. *see picture 7*
(8) Press the + button on the number pad to go up 1 level!
Now because this pyramid is small you wont need to place a foundation or inner walls!.
Jump straight to ORDER NUMBER (3). *see picture 8*
(9) Now continue the steps (3) to (7) It should look like this. *see picture 9*
(10) Almost finnished! Now theres 1 more point i need to make. There are invisible stairs that allow you to go up
and down the pyramidsplace them on the outside of your pyramid. (NOT on the inside-and NEVER on the ground floor!)
ID no 459 *see picture 10*
Congratulations you have created your first pyramid.
Now follow the steps on making this pyramid a house.
I know there have been other tutorials on this matter.
I have never seen one in this much detail and to be honest I couldnt understand them!
So all credits go to me!
Hotkeys i used to create the pyramids
Q = Zoom out
W = Zoom in
- = Down 1 floor
+ = Up 1 floor
J = Jump to item
I have been asked on many occasions how this is done so here you go!
The 1st perfet pyramid isnt easy! but i will teach you how to make it then you will master the effects yourself!
ORDER NUMBER()
(1) Build your foundations (the floor). ID no : 412 i use. *see picture 1*
(2) Put the inner walls and an entrance ontop of your foundation. ID no : 1060/Door ID no : 1239 *see picture 2*
(3) Place inner Pyramid walls 1 square away from the sides, 2 squares away from the corners on your foundation. ID no : 1398/1400/1402/1404 *see picture 3*
(4) Place the outer Pyramid walls at the edge of your foundation BUT leaving the corners. ID no : 1399/1401/1403/1405 *see picture 4*
(5) Place your inner corners and outer corners on your foundation. inner corner ID no : 1553/1555/1557/1559. outer corner ID no : 1552/1554/1556/1558 *see picture 5*
(6) Now place a raised floor inbetween the innerwall and inner pyramid wall. ID no : 1071. *see picture 6*
(7) Place fake edges on the raised floor so it gives the pyramid a detailed look!. ID no : 1072/1073/1074/1075. *see picture 7*
(8) Press the + button on the number pad to go up 1 level!
Now because this pyramid is small you wont need to place a foundation or inner walls!.
Jump straight to ORDER NUMBER (3). *see picture 8*
(9) Now continue the steps (3) to (7) It should look like this. *see picture 9*
(10) Almost finnished! Now theres 1 more point i need to make. There are invisible stairs that allow you to go up
and down the pyramidsplace them on the outside of your pyramid. (NOT on the inside-and NEVER on the ground floor!)
ID no 459 *see picture 10*
Congratulations you have created your first pyramid.
Now follow the steps on making this pyramid a house.
I know there have been other tutorials on this matter.
I have never seen one in this much detail and to be honest I couldnt understand them!
So all credits go to me!
Hotkeys i used to create the pyramids
Q = Zoom out
W = Zoom in
- = Down 1 floor
+ = Up 1 floor
J = Jump to item